Main PageCompany Introduction LetterIndustrial and Distributorship InformationServicesEmail and Company Location

Rotary torque systems

The all-enviroment system consists of an indicating gauge and an idler arm assembly. The six inch gauge is fluid filled to reduce the effects of shock and corrosion and to eliminate the possibility of glass frosting. The adjustable pointer can be dampened to control its sensitivity. The gauge and idler arm assembly are interconnected by a hydraulic hose with a convenient filling steeple and hand pump for remote adjustment. The system is available in two different gauge scales (0-500 and 0-1000) and four different chain configurations: 1-3/4 inch single chain, two inch single chain, 1-3/4 inch double chain, two inch double chain
Joint Torque Systems
Tong Torque Systems-Line Pull
0-2,500 foot-pounds*
0-5,000 foot-pounds*
0-10,000 foot-pounds*
0-12,000 foot-pounds*
0-15,000 foot-pounds*
0-20,000 foot-pounds*
0-25,000 foot-pounds*
0-50,000 foot-pounds*
0-100,000 foot-pounds*		 0-10,000 Pounds* line pull
0-15,000 Pounds* line pull
0-20,000 Pounds* line pull
0-25,000 Pounds* line pull
0-30,000 Pounds* line pull
Remote pressure gauge systems

There are three mounting configurations available. Bracket mount, panel mount, or flanged case is available for panel mounting with a choice of single or dual pointer systems.The dual pointer system provides four times greater sensitivity because the secondary pointer travels four complete revolutions for each single revolution of the primary pointer. A mud diaphragm separates line fluids from the gauge mechanism and prevents contamination.
Clipper Systems

Each CLIPPER SYSTEM includes a weight indicating gauge, a protective steel box, a deadline diaphragm, and a selection of eight, interchangeable dial faces designed for the following configurations:

7/8 inch line size 1 inch line size 1 1/8 inch line size
2 lines - 107,000 pounds* 4 lines - 195,000 pounds* 6 lines - 275,000 pounds*
4 lines - 214,000 pounds* 6 lines - 292,000 pounds* 8 lines - 365,000 pounds*
6 lines - 320,000 pounds* 8 lines - 390,000 pounds*

* also available in metric or S.I. Units.
R.P.M. Meter Systems
Meters are available in the following ranges:

0-159/300 S.P.M.
0-200 S.P.M.
0-300 S.P.M.
0-500 S.P.M.

This tachometer can be connected to any shaft turning in direct ratio to the rotary table. The meter is mounted near the driller in a driller's console or weight indicator box. The tachometer generators are available in two models: Type E which is approved for operation in hazardous areas is designated as NEC class 1, group F and G, division 1. Type AB is dust resistant and is designed for use in general purpose areas. Normal output from each tachometer generator is 10v AC at 150 ma.
Weight Indicators

These weight indicators come in both panel/console mounted and as box mounted units. English, Metric or S.I. Metric dials. The systems are available in the follow ranges:
Type 150 150,000 SLP* 10,12,14 and 16 line dials
Type 125 125,000 SLP* 8,10,12, and 14 line dials
Type 100 100,000 SLP* 8,10,12, and 14 line dials
Type 75 75,000 SLP* 6,8,10 and 12 line dials
Type 50 50,000 SLP* 6,8,10 and 12 line dials
Type FS 40,000 SLP* 4,6,8 and 10 line dials

EXCLUSIVES