 |
-
"Power Shift"
Transmission -Enables operator to change gears during Tong
Operation
-
Improved
Drive Alignement -Minimizes wasted power and provides quieter
running with less friction
-
Speed -Allows
joint make-up in as little as 5 seconds and break-out in
7 seconds
- Split Guide Ring -Provides easier and safer
access to jaws and final drive gear components
- Pressurized Oil Bath -Insures uniform lubrication
of moving parts
- Adjustable Clutch -Extends the life of transmissions
components
- Available with air or hydraulic assist for back-up
tool
Controlled by driller at console
|
| SPEED & POWER REQUIREMENTS (500) |
| Size Range |
1 5/16" to
7" (33.3mm to 177.8mm) |
| Torque @ 2000
psi (138 bars) |
High Gear |
Low Gear |
| Ft Lbs (Nm) |
1300 (1763) |
6000* (8136) |
| Speed (rpm) @ 33.5 gpm (127LPM) |
126 |
27 |
| Weight W/Back-up
Tool and Transport Rack |
1289 lbs (553
kg) |
|
|
*Model 500 ht - 8000ft. lbs (10848 Nm) |
| |
| SPEED & POWER REQUIREMENTS (600) |
| Size Range |
1
5/16" to 7" (33.3mm to 177.8mm) |
| Torque
@ 2000 psi (138 bars) |
High
Gear |
Low
Gear |
| Ft
Lbs (Nm) |
2500
(3390) |
15000*
(20340) |
| Speed
(rpm) @ 33.5 gpm (127LPM) |
76 |
11
|
| Weight
W/Back-up Tool and Transport Rack |
2100
lbs (953 kg) |
 |
|
*Model 600 LT - 12000ft.
lbs (16272 Nm)
|
|
